Best NASCAR Heat 5 Settings for Thrustmaster TX / T300

NASCAR Heat 5 plays great with a wheel, but it does need some tweaking to get the best experience when using the Thrustmaster TX or T300. The default force feedback is set way too strong on these wheels. This is easy enough to fix by simply lowering some settings. A bigger problem is that of the steering angle.

There is no soft lock feature in this game, meaning that you can continue turning the wheel past the point you can in the real car. Nothing happens in game when you do this, the input is ignored entirely, but it makes it much harder to control a spin when you can't tell when you've reached that maximum rotation angle.

In this guide, I will show how to correct both of these issues by setting the proper values in game and in the Thrustmaster Control Panel, if playing on PC.

Thrustmaster Control Panel Settings

It's important to set the steering angle correctly. In some games, the lack of a Soft Lock feature is a minor issue because you only very rarely reach that point. In NASCAR, with its small steering angle, you will frequently hit the maximum rotation angle. When the wheel keeps turning past that point, the game just doesn't feel right and the cars are harder to control as a result.

We can correct this by changing the rotation angle in the Thrustmaster Control Panel, which will provide the rotation lock, and modifying the in-game settings to match this. Ordinarily, I don't like to modify the driver-level rotation angle, as it is annoying to have to change it when you load up a different game. In this case, there simply is no other way to get this to work.

Setting Value
Rotation 240°
Overall Strength of all forces 75%
Constant 100%
Periodic 100%
Spring 100%
Damper 100%
Auto-Center by the game

By setting the rotation angle in the Thrustmaster Control Panel, we make it appear to the game that the wheel is only capable of a 240° rotation. The wheel itself will provide the soft lock when you try to rotate past that angle.

Spring and Damper are not used by NASCAR Heat 5, so can be set to any value without issue. As a general rule, I leave these at 100% since there are some games that require them.

BOOST should always be turned off. For an in-depth look as to why, see my BOOST Force Feedback Analysis.

NASCAR Heat 5 Settings

In Options > Player 1 Controls:

Setting Value
Input Device Steering Wheel
Rotation Angle 240°

Despite the game telling you to put in the maximum rotation for your wheel, you need to match the value that is in the Thrustmaster Control Panel for this to work correctly. I had a bug occur that required setting this to 180° for some reason, but it went away. If you set this to 240° and find the steering calibration is wrong, try 180° and see if it fixes it.

Force Feedback

The settings don't have any numerical values, just a simple slider. The default value is usually the center, which I will refer to as 0 in the following settings. The sliders can go from -5, if fully to the left, all the way to +5, if all the way to the right.

Force Feedback Settings for Road and Oval
Force Feedback Settings for Tarmac courses.
Force Feedback Settings for Dirt
Force Feedback Settings for Dirt courses.
Setting Value
Effect Strength -1 (Tarmac) / +4 (Dirt)
Impact Effect On

Effect Strength controls the resistance to turning based on the tire grip. Setting this too high will make the wheel too heavy and lifeless. There is much less resistance on dirt tracks, so the force feedback can be turned up for them.

Impact Effects shakes the wheel when you hit other cars or the wall. On dirt tracks, this can cause a lot of chatter that can be irritating.


Make sure the deadzones are all the way to the left.

Deadzone Settings
Deadzone Settings
Setting Value
Steering -5
Brake -5
Throttle -5
Clutch -5


Sensitivity Settings
Sensitivity Settings
Setting Value
Steering Range +5
Steering Sensitivity 0
Brake Sensitivity -5
Throttle Sensitivity -5

Steering Range should be all the way up. This tells the game to use the full 240° rotation we had set earlier.

Steering Sensitivity should be left at 0. Raising this will make the in-game wheel reach full lock before the actual wheel does. Lowering it will prevent the in-game wheel from being able to reach full lock.

Brake Sensitivity and Throttle Sensitivity are personal preference, but I recommend turning them all the way down to get a more linear response.

In Options > Gameplay:

Hide Cockpit Wheel
Setting Value
Hide Cockpit Wheel On

I recommend turning on "Hide Cockpit Wheel." The wheel doesn't accurately display your real turning angle. It only turns 90° and has an odd sensitivity around the center. I find it more distracting than anything and I'm glad they added the option to turn it off.


NASCAR Heat 5 isn't the most serious simulation game, but I have a lot of fun with it. With the wheel set up correctly, you can really feel the weight shift in the car. If you're a fan of NASCAR, this does a great job of letting you easily run some races with all the modern rules without requiring a great deal of practice. If you have a VR headset, you may be interested to know that NASCAR Heat 5 works surprisingly well in VR using VorpX.

Let me know if you have any comments or questions.

Question or Comment?