Best F1 23 Settings for Thrustmaster TMX / T150

F1 23 plays great with a wheel, once it is configured properly. The default force feedback for the Thrustmaster TMX and T150 is actually very good, but it makes the wheel a little too heavy and the vibrations are a little too weak.

Like its predecessors, it's easy to fix the force feedback by adjusting a few settings. Apparently the force feedback system has been upgraded this year. Honestly, it's not dramatically different, but you don't feel the understeer much at all anymore. It's very easy to jump right in if you've played any of the F1 games before.

In this guide, we will first look at the settings you need to set in the Thrustmaster Control Panel, if playing on a PC. Then we will look at the in-game settings to improve the force feedback.

Thrustmaster Control Panel Settings

F1 23 will set the correct steering angle in the game itself and has a proper soft lock, so you can leave the rotation at the maximum.

Setting Value
Rotation 900° (TMX) 1080° (T150)
Overall Strength of all forces 100%
Constant 100%
Periodic 100%
Spring 100%
Damper 100%
Auto-Center by the game

Spring is not used by F1 23, so the value actually doesn't matter. Some games require Spring to be on for their force feedback to work, so I keep it at 100% as a general rule.

Damper is used for the in-game Wheel Damper setting.

BOOST should always be turned off. For an in-depth look as to why, see my BOOST Force Feedback Analysis.

F1 23 Settings

In Options > Settings > Controls, Vibration & Force Feedback > Thrustmaster TMX / T150 > Calibration:

Setting Value
Steering Rate 100%
Steering Deadzone 0
Steering Linearity 0-10
Steering Saturation 0

You can raise the Steering Linearity to make the wheel less sensitive when the wheel is centered. This can help if you find the steering a little too sensitive on the straights.

You may also want to raise the Brake and Throttle Linearity, which can help create smoother pedal inputs by lowering the sensitivity of the pedals at the beginning of the pedal travel.

In Options > Settings > Controls, Vibration & Force Feedback > Thrustmaster TMX / T150 > Vibration & Force Feedback:

Setting Value
Vibration & Force Feedback On
Vibration & Force Feedback Strength 65 (F1) / 55 (Supercars)
On Track Effects 60
Rumble Strip Effects 50
Off Track Effects 60
Wheel Damper 1
Maximum Wheel Rotation (F1 & F2) 360°
Maximum Wheel Rotation (Supercars) 720°

Vibration & Force Feedback Strength is the overall strength of the force feedback. Raising it too much starts to overwhelm the wheel, making the wheel feel heavy and lifeless. For F1 cars, I set this to about 65 to get a good sense of weight in the wheel. For Supercars, I lower this to 55. In either car, you may want to adjust this based on the track if the wheel feels too heavy or too light.

On Track Effects is the vibrations felt based on the track surface. This is most noticed in certain bumpy sections of a track.

Rumblestrip Effects is the vibration felt when running over a kerb. This can be very strong on certain kerbs and have no effect on others.

Off Track Effects is the vibration felt when you run over grass or a gravel trap.

Wheel Damper gives weight to the wheel. Without this, the wheel goes weightless when stopped and in very slow corners. Even a small amount of damper gives enough weight to feel more natural, without being too strong.

Maximum Wheel Rotation (F1 & F2) should be no larger than 360°. You can lower this a little bit if you want to make it easier to turn to full lock.

Maximum Wheel Rotation (Supercars) should be set to about 720°. The default of 900° is too high for these kinds of cars. Unfortunately the steering animation is limited to 360°, which is quite distracting, especially in VR.


F1 23 is a nice update from F1 22. The cars seem to have more grip this year, making driving on the limit easier than it was in F1 22.

Let me know if you have any questions or comments.

Question or Comment?