Best NASCAR '15 Victory Edition Settings for Thrustmaster TMX / T150

NASCAR '15 Victory Edition plays well with a wheel and pedals, but it does take some getting used to. It models the fact that these cars are built primarily to turn left, so much so that you have to turn right to make the car drive in a straight line. This fact alone surprises a lot of people and makes the game feel strange if you're not expecting it.

For the Thrustmaster TMX and T150, there are some awkward default steering settings that make the game unnecessarily hard to control, feeling as if your wheel isn't working properly. Happily, all it takes is some pretty small adjustments to make it feel more natural.

In this guide, I will show how to correct these issues by setting the proper values in-game and in the Thrustmaster Control Panel, when playing on PC.

Thrustmaster Control Panel Settings

NASCAR '15 Victory Edition doesn't have a way to set the steering angle in-game, so we will set it directly in the Thrustmaster Control Panel. I don't love doing this, as I tend to forget to change it back to normal when loading up another game, but there is no other option for this game.

These cars have a very small steering angle, usually about 240°, so that is what I use. The steering animation won't line up with the actual wheel inputs, but it still feels better.

Setting Value
Rotation 240°
Overall Strength of all forces 100%
Constant 100%
Periodic 100%
Spring 100%
Damper 100%
Auto-Center by the game

Spring and Damper are not used by NASCAR '15, so can be set to any value without issue. As a general rule, I leave these at 100% since there are some games that require them.

BOOST should always be turned off. For an in-depth look as to why, see my BOOST Force Feedback Analysis.

NASCAR '15 Victory Edition Settings

In Options > Controls > Driving Controls:

The first time you open the settings, make sure to center the wheel when it asks you to. It uses this calibration to set the center point of the wheel.

Unusually for a game like this, when I opened the game for the first time, I had to manually bind all of the controls. Take care when binding the pedals to also calibrate them properly when prompted.

In Options > Controls > Advanced Settings:

Setting Value
Force Feedback 45%
Road Feedback Strength 70%
Vibration 100%
Steering Deadzone 0%
Steering Sensitivity 10%
Steering Linearity 50%

Force Feedback controls all the main forces you feel in the wheel. This includes tire grip, bumps in the track and collisions. Setting this too high will make the wheel too heavy and remove a lot of detail, especially in the corners.

Road Feedback Strength controls the vibrations you feel when you drive over grass or kerbs.

Vibration has no effect, as far as I can tell.

Steering Sensitivity makes the wheel a little less sensitive when it is centered. Setting this too high will create a large range in the center of the wheel where your inputs have very little effect.

Steering Linearity is set to make a neutral steering input. Raising this too high will make the wheel input accelerate towards the far ends of the wheel range.


Even with these settings, I still find the steering a little strange. It might be because I'm more used to the less realistic physics of the NASCAR Heat games or that the steering animation doesn't match the actual steering input. Whatever the case, after spending enough time with it, I've gotten used to it. Admittedly, I'm not an expert at NASCAR racing, but it's still good fun, even if I'm not the greatest at it.

Let me know if you have any comments or questions.

Question or Comment?