Best American Truck Simulator Settings for Logitech G29 / G920

This page has been updated for version 1.50.

American Truck Simulator recently updated its force feedback to a physics-based system, giving a more realistic experience. It previously only used a Centering Spring and some vibration effects, which was a fairly lackluster experience. I'm actually surprised how well it works with the Logitech G29 and G920. The force feedback deadzone, which can be a real annoyance in other games, isn't an issue here.

This isn't anything like a racing game where you need to feel the grip to play the game well. This is just about creating a relaxing, immersive experience. To that end, these settings keep the wheel relatively light and keep the vibration effects from being too loud.

In this guide, I will show you the settings I use in G HUB and in-game to improve the force feedback.

G HUB Settings

Trucks have a larger steering angle than these wheels do, so the best we can do is keep the rotation at the maximum. The game scales the input so you get the full range in-game, but this means the in-game wheel won't always align with yours.

Create a new profile for American Truck Simulator with the following settings:

Setting Value
Operating Range 900°
Sensitivity 50
Centering Spring Off

American Truck Simulator Settings

In Options > Gameplay > Truck Settings:

Uneven Surface Simulation Settings
Uneven Surface Simulation Settings
Setting Value
Steering Animation Range 900°
Uneven Surface Simulation 52%

Steering Animation Range should match what is set in G HUB so that the in-game wheel animation correctly matches your real input.

Uneven Surface Simulation adds some randomly generated wobble to the wheel, to simulate more diverse road surfaces. I like the idea of this, but I found it can get quite annoying, so I lowered this quite a bit. If you like it, feel free to raise it.


In Options > Controls:

Logitech G29/G920 Force Feedback Settings
Logitech G29/G920 Force Feedback Settings
Setting Value
Force Feedback Checked
Overall Gain 120%
Centering at High Speed 100%
Centering at Low Speed 42%
Internal Friction 42%
Engine Resonance 5%
Terrain Surface 11%
Bumps 80%
Collisions 72%
Gearbox Grind 32%
Understeer Slip 32%
Assisted Steering 50%

Force Feedback can be turned off by unchecking this box.

Overall Gain is the main strength of the driving force you will feel. I raise this to give the wheel a little more power. Setting this too high makes the wheel quite heavy.

Centering at High Speed adds a Center Spring force when traveling at high speed. I leave this at the maximum to give a reasonable weight to the wheel when on the highways.

Centering at Low Speed adds a Center Spring force when traveling at low speed. I turn this down a little to make the wheel a little lighter when parking and navigating city streets.

Internal Friction adds a constant weight to the wheel. I lower this a little bit to lighten the wheel.

Engine Resonance is the vibration you feel from the engine. I like this, but it needs to be set very low or it will make the wheel shake way too much.

Terrain Surface is the vibration felt when driving over dirt or rough roads. This also needs to be kept quite low or it will shake the wheel too much.

Bumps is the vibration felt when going over bumps in the road, or driving over a curb. These can be quite strong and noisy, so I turn this down to make them more reasonable.

Collisions is the vibration felt when you hit a car or anything on the side of the road. Likewise, these are very strong and loud on these wheels, so I turn them down.

Gearbox Grind may only have an effect with an h-pattern shifter, which I don't have unfortunately. It doesn't seem to do anything in the sequential shifting mode. I've left this at the default value.

Understeer Slip vibrates the wheel if you enter understeer. This happens very infrequently in normal driving. I don't particularly like the effect, so I lower it to make it more subtle.

Assisted Steering controls the strength of the automated control of the steering wheel when you enable the Lane Keeping Assistant. If this is too low, the wheel won't turn enough and if it's too high it will turn too much and cause bad oscillations.

Conclusion

I play American Truck Simulator in a very casual way and these settings may reflect that. I leave all the stability options at their default values, which will impact how the wheel feels. If you are looking to play in a highly realistic way, these settings will probably need some adjustments to give the wheel more weight.

Let me know if you have any questions or comments.

Question or Comment?